凡俗子
ok probe-fcal-all出现Bus fault
ok probe-fcal-all
probe-fcal-all ?
ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/pci@8,600000/SUNW,qlc@4
/pci@8,700000/scsi@2,1
Bus fault
Bus fault
Bus fault
Bus fault
Bus fault
Bus fault
Bus fault
Bus fault
凡俗子
配置obdiag测试测试
obdiag>test-all
Error: /pci@8,700000/ebus@5/floppy@1,3023f0 selftest failed, return code = 1
Selftest at /pci@8,700000/ebus@5/floppy@1,3023f0 (errors=1) ........... failed
Testing /pci@8,700000/ebus@5/gpio@1,300600
Subtest gpio-port1data-reg-test
Subtest gpio-port1dir-reg-test
Subtest gpio-port1type-reg-test
Subtest gpio-port1ctrl-reg-test
Subtest gpio-port2data-reg-test
凡俗子
Testing /pci@8,700000/ebus@5/floppy@1,3023f0
Subtest init&test
ERROR : Recalibrate failed, floppy improperly connected or defective.
DEVICE : /pci@8,700000/ebus@5/floppy@1,3023f0
SUBTEST : selftest:init&test
MACHINE : SUNW,Sun-Blade-1000 (UltraSPARC-III+)
SERIAL# : 2358754
DATE : 06/11/2008 10:27:22 GMT
CONTR0LS: diag-level=max test-args=subtests
Error: /pci@8,700000/ebus@5/floppy@1,3023f0 selftest failed, return code = 1
Selftest at /pci@8,700000/ebus@5/floppy@1,3023f0 (errors=1) ........... failed