请大家帮忙看看我的ProFTPd怎么不能用ls?为了方便测试，我是在VMware下安装CentOS 5.1。已经停止了iptables.
可以使用cd, pwd, mkdir等，但是不能使用ls, put, get
安装：
[quote]wget --passive-ftp [url=ftp://ftp.proftpd.org/distrib/source/proftpd-1.3.1.tar.gz]ftp://ftp.proftpd.org/distrib/source/proftpd-1.3.1.tar.gz[/url]
tar xvfz proftpd-1.3.1.tar.gz
cd proftpd-1.3.1/
./configure --sysconfdir=/etc
make
make install
cd ..
ln -s /usr/local/sbin/proftpd /usr/sbin/proftpd
[/quote]
proftpd.conf文件内容：
[quote]
# This is the ProFTPD configuration file
# $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $
ServerName "ProFTPD server"
ServerIdent on "FTP Server ready."
ServerAdmin root@localhost
ServerType standalone
#ServerType inetd
DefaultServer on
AccessGrantMsg "User %u logged in."
#DisplayConnect /etc/ftpissue
#DisplayLogin /etc/ftpmotd
#DisplayGoAway /etc/ftpgoaway
DeferWelcome off
# Use this to excude users from the chroot
DefaultRoot ~ !adm
# Use pam to authenticate (default) and be authoritative
AuthPAMConfig proftpd
AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups off
UseReverseDNS off
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# Default to show dot files in directory listings
ListOptions "-a"
# See Configuration.html for these (here are the default values)
#MultilineRFC2228 off
#RootLogin off
#LoginPasswordPrompt on
#MaxLoginAttempts 3
#MaxClientsPerHost none
#AllowForeignAddress off # For FXP
# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart on
AllowStoreRestart on
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 20
# Set the user and group that the server normally runs at.
User nobody
Group nobody
# Disable sendfile by default since it breaks displaying the download speeds in
# ftptop and ftpwho
UseSendfile no
# This is where we want to put the pid file
ScoreboardFile /var/run/proftpd.score
# Normally, we want users to do a few things.
<Global>
AllowOverwrite yes
<Limit ALL SITE_CHMOD>
AllowAll
</Limit>
</Global>
# Define the log formats
LogFormat default "%h %l %u %t /"%r/" %s %b"
LogFormat auth "%v [%P] %h %t /"%r/" %s"
# TLS
# Explained at [url=http://www.castaglia.org/proftpd/modules/mod_tls.html]http://www.castaglia.org/proftpd/modules/mod_tls.html[/url]
#TLSEngine on
#TLSRequired on
#TLSRSACertificateFile /etc/pki/tls/certs/proftpd.pem
#TLSRSACertificateKeyFile /etc/pki/tls/certs/proftpd.pem
#TLSCipherSuite ALL:!ADH:!DES
#TLSOptions NoCertRequest
#TLSVerifyClient off
##TLSRenegotiate ctrl 3600 data 512000 required off timeout 300
#TLSLog /var/log/proftpd/tls.log
# SQL authentication Dynamic Shared Object (DSO) loading
# See README.DSO and howto/DSO.html for more details.
#<IfModule mod_dso.c>
# LoadModule mod_sql.c
# LoadModule mod_sql_mysql.c
# LoadModule mod_sql_postgres.c
#</IfModule>
# A basic anonymous configuration, with an upload directory.
#<Anonymous ~ftp>
# User ftp
# Group ftp
# AccessGrantMsg "Anonymous login ok, restrictions apply."
#
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
#
# # Limit the maximum number of anonymous logins
# MaxClients 10 "Sorry, max %m users -- try again later"
#
# # Put the user into /pub right after login
# #DefaultChdir /pub
#
# # We want 'welcome.msg' displayed at login, '.message' displayed in
# # each newly chdired directory and tell users to read README* files.
# DisplayLogin /welcome.msg
# DisplayFirstChdir .message
# DisplayReadme README*
#
# # Some more cosmetic and not vital stuff
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# # Limit WRITE everywhere in the anonymous chroot
# <Limit WRITE SITE_CHMOD>
# DenyAll
# </Limit>
#
# # An upload directory that allows storing files but not retrieving
# # or creating directories.
# <Directory uploads/*>
# AllowOverwrite no
# <Limit READ>
# DenyAll
# </Limit>
#
# <Limit STOR>
# AllowAll
# </Limit>
# </Directory>
#
# # Don't write anonymous accesses to the system wtmp file (good idea!)
# WtmpLog off
#
# # Logging for the anonymous transfers
# ExtendedLog /var/log/proftpd/access.log WRITE,READ default
# ExtendedLog /var/log/proftpd/auth.log AUTH auth
#
#</Anonymous>
[/quote]
直接登录到CentOS服务器测试，没有问题。
虚拟机器的IP： 192.168.102.133
ftp 192.168.102.133
[quote]
Connected to 192.168.102.133.
220 FTP Server ready.
500 AUTH not understood
500 AUTH not understood
KERBEROS_V4 rejected as an authentication type
Name (192.168.102.133:root): testhost
331 Password required for testhost.
Password:
230 User testhost logged in.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> cd public_html
250 CWD command successful
ftp> pwd
257 "/public_html" is current directory.
ftp> ls
227 Entering Passive Mode (192,168,102,133,12,227).
150 Opening ASCII mode data connection for file list
drwxr-x--- 3 testhost testhost 4096 Feb 23 20:45 .
drwxr-x--- 10 testhost testhost 4096 Feb 23 20:45 ..
lrwxrwxrwx 1 root root 31 Feb 23 20:45 awstats-icon -> /usr/local/awstats/wwwroot/icon
lrwxrwxrwx 1 root root 31 Feb 23 20:45 icon -> /usr/local/awstats/wwwroot/icon
drwxr-xr-x 2 testhost testhost 4096 Feb 28 10:25 stats
226 Transfer complete.
ftp> quit
221 Goodbye.
[/quote]
但是如果直接在Windows下，就不能使用ls命令了
C:/>ftp 192.168.102.133
[quote]
Connected to 192.168.102.133.
220 FTP Server ready.
User (192.168.102.133:(none)): testhost
331 Password required for testhost.
Password:
230 User testhost logged in.
ftp> mkdir ttt
257 "/ttt" - Directory successfully created
ftp> cd ttt
250 CWD command successful
ftp> pwd
257 "/ttt" is current directory.
ftp> cd /public_html
250 CWD command successful
ftp> ls
200 PORT command successful
[/quote]
出现200 PORT command successful后，就一直不返回了。
不知道是什么原因，请高手指点。谢谢
[[i] 本帖最后由 lwbbs 于 2008-2-29 09:13 编辑 [/i]]